SKU: RSN_FIX

T1N Rumble Strip Noise Fix (NAG1 Trans)

$108.00 $120.00
Shipping calculated at checkout.

Do you have the common "Rumble Strip Noise"? Here is the fix for it!

MMS has been hard at work sourcing a valve body plate pre-drilled and ready to install! This plate is backed by MMS.

It's easy:

1. Unscrew the transmission pan drain with a 5mm Allen wrench.

2. Catch the transmission fluid in a clean container.

3. Unscrew the 6 transmission pan bolts with a T30 bit.

4. Once you remove the transmission pan, the plate you are swapping out is on the left side of the valve body.

5. Remove the 8 screws holding it on with a T15 bit and exchange it for your new plate from MMS. Be sure to remove the plate carefully. It holds in some springs under pressure that might fall out.6. Follow these steps in reverse to put everything back together again.

T20 torque: 35 in/lbs

T30 torque: 71 in/lbs5mm

drain plug torque: 15 ft/lbs7

CORE CHARGE INCLUDED ($50) will be refunded upon return of your valve body plate to MMS HQ.